FTU Blackberry Patch

 

I used PSP 2023 but any version of Paint Shop Pro should work. You need a basic knowledge of Paint Shop Pro for this tutorial.

I used the PTU artwork of Melissa Dawn #28-1 which you can purchase at CDO here. You must have a license to use this artwork.

I used a FTU kit from My Tagging Addiction called "Blackberry Fairy" that you can get here.

I used a FTU mask from Sylly Creationz #21 you can get here.

Font is called Blackberry Jam 

Drop shadow used is 2,2,50,10

Refer to tag for placement

Open a blank canvas 800x800

Selections select all

Copy paper 3 paste into selection select none

Apply mask ungroup layers merge down

Resize element 14 to 75% place to the left duplicate layer mirror horizontal

Resize element 3 to 75% place top center

Resize frame 2 to 65%

Use freehand selection tool or magic wand to select inside the frame

Copy paper 8 paste into selection on seperate layer select none

Resize element 2 to 35% place top right of frame duplicate layer mirror horizontal

Resize element 45 to 50% place to the right

Resize element 38 to 50% place to the left move below frame layer

Resize element 26 to 35% place to the right

Resize element 17 to 20% place to the left

Resize element 44 to 35% place to the right

Resize element 14 to 35% place to the left duplicate layer mirror horizontal

Resize your tube to 45%

Resize element 32 to 20% place to the right

Resize element 29 to 40% mirror horizontal place to the right

Resize element 25 to 45% place to the left

Resize element 19 to 25% place to the left

Resize element 30 to 20% place bottom center

Resize element 15 to 25% place to the right

Resize element 42 to 25% place to the left

Resize element 50 to 20% place bottom center

Resize element 49 to 15% place to the right

Resize element 35 to 10% place to the right

Resize element 36 to 15% place to the left 

Resize element 31 to 10% place to the right

Resize element 23 to 10% place to the left

Resize element 46 to 10% place to the right on the well

Copy and paste element 69 place at the top 

Resize element 39 to 10% duplicate a few times and place around where desired

Resize element 43 to 15% duplicate a few times and place around where desired

Resize element 40 to 50% duplicate a few times and place around where desired

Add any other elements you like

Add copyright and info

Layers merge visible

Resize image to 650x650

Save as .png

FTU Cherry Grove

 

I used PSP 2023 but any version of Paint Shop Pro should work. You need a basic knowledge of Paint Shop Pro for this tutorial.

I used the PTU artwork of Kajenna called "Summer" which you can purchase at PFD here. You must have a license to use this artwork.

I used a FTU kit from Adrienne's Designs called "Cherry Kiss" that you can get here.

I used a FTU mask from Mizteeque #288 you can get here.

Font is called Cherry and Kisses

Drop shadow used is 2,2,50,10

Refer to tag for placement

Open a blank canvas 800x800

Selections select all

Copy paper 1 paste into selection select none

Apply mask ungroup layers merge down

Resize element 27 to 50% place to the top right duplicate layer mirror horizontal

Resize element 35 to 75% place top right duplicate layer mirror horizontal

Resize element 49 to 60% place top right

Resize element 47 to 60% place top left 

Resize element 59 to 40% place to the right

Resize element 66 to 20% place to the left

Resize element 23 to 30% mirror horizontal place to the left

Resize your tube to 20%

Resize element 40 to 30% place to the right duplicate layer mirror horizontal

Resize element 88 to 30% place to the left

Resize element 116 to 30% place bottom center

Resize element 73 to 35% place to the right

Resize element 84 to 30% place to the right

Resize element 122 to 5% place to the right

Resize element 148 to 15% place bottom center

Resize element 155 to 10% place to the left

Resize element 158 to 10% place to the left

Resize elements 128 and 130 to 5% duplicate layers and place along bottom where desired

Add any other elements you like

Add copyright and info

Layers merge visible

Resize image to 650x650

Save as .png

FTU Sew in Love

 

I used PSP 2023 but any version of Paint Shop Pro should work. You need a basic knowledge of Paint Shop Pro for this tutorial.

I used the PTU artwork of Laguna called "Kitten and Balls of Wool" which you can purchase at PFD here. You must have a license to use this artwork.

I used a FTU kit from Adrienne's Designs called "Handmade with Love" that you can get here.

I used a FTU mask from Lori's PSP Graphics #1372 you can get here.

Font is called Secret Admirer

Drop shadow used is 2,2,50,10

Refer to tag for placement

Open a blank canvas 800x800

Selections select all

Copy paper 17 paste into selection select none

Apply mask ungroup layers merge down duplicate layer

Resize frame 1 to 70% place to the right

Use freehand selection tool or magic wand to select inside the frame

Copy paper 2 paste into selection on seperate layer select none

Resize element 79 to 35% place behind top of frame so that only flowers show duplicate layer free rotate to the left

15 degrees move to the left duplicate layer mirror horizontal

Resize element 25 to 60% place to the left

Resize element 42 to 50% place to the right

Resize element 65 to 30% place to the left

Resize element 45 to 30% place to the right

Resize your tube to 35%

Resize element 123 to 25% place to the left

Resize element 86 to 20% place to the right

Resize element 105 to 20% place to the right

Resize element 116 to 20% mirror horizontal place to the right

Resize element 91 to 20% place to the left

Resize element 88 to 15% place to the left

Resize element 114 to 20% place bottom center

Resize element 143 to 15% place to the left

Resize element 157 to 10% place to the right

Resize element 121 to 13# place to the right

Resize element 132 to 15% place bottom center

Add any other elements you like

Add copyright and info

Layers merge visible

Resize image to 650x650

Save as .png

FTU A Country Easter

 

I used PSP 2023 but any version of Paint Shop Pro should work. You need a basic knowledge of Paint Shop Pro for this tutorial.

I used the PTU artwork of Ellie Milk called "Bunny with a violin" which you can purchase at PFD here. You must have a license to use this artwork.

I used a FTU kit from My Tagging Addiction called "Country Easter" that you can get here.

I used a FTU mask from Mizteeque #56 you can get here.

Font is called Countryside

Drop shadow used is 2,2,50,10

Refer to tag for placement

Open a blank canvas 800x800

Selections select all

Copy paper 5 paste into selection select none

Apply mask ungroup layers merge down

Resize element 48 to 35% place top center

Resize element 47 to 75% place above house duplicate layer mirror horizontal

Resize element 46 to 25% place to the left duplicate layer mirror horizontal

Resize element 20 to 20% mirror horizontal place to the right

Resize element 11 to 25% place to the left

Resize element 45 to 25% place to the left duplicate layer mirro horizontal

Resize element 44 to 20% place to the left duplicate layer mirror horizontal

Resize element 7 to 20% place to the left duplicate layer mirror horizontal

Resize element 9 to 25% place to the right

Resize element 21 to 25% place to the left

Resize your tube to 35%

Resize element 13 to 20% place to the left

Resize element 16 to 15% place to the right

Resize element 17 to 15% place to the right

Resize element 2 to 25% place bottom center

Resize element 23 to 15% place bottom center

Resize element 10 to 15% place to the left

Resize element 5 to 10% place to the right

Resize element 27 to 15% place to the right

Resize element 42 to 15% mirror horizontal place to the right on the birdhouse

Resize element 43 to 25% mirror horizontal place to the top left

Resize element 26 to 35% place to the top right

Add any other elements you like

Add copyright and info

Layers merge visible

Resize image to 650x650

Save as .png

FTU Playful Panda

 

I used PSP 2023 but any version of Paint Shop Pro should work. You need a basic knowledge of Paint Shop Pro for this tutorial.

I used the PTU artwork of Laguna called "Peaceful Panda" which you can purchase at PFD here. You must have a license to use this artwork.

I used a FTU kit from My Tagging Addiction called "Asia" that you can get here.

I used a FTU mask from Mizteeque #256 you can get here.

Font is called Chinese Dragon

Drop shadow used is 2,2,50,10

Refer to tag for placement

Open a blank canvas 800x800

Selections select all

Copy paper 6 paste into selection select none

Apply mask ungroup layers merge down

Copy and paste element 57 place top left duplicate layer mirror horizontal

Copy annd paste element 58 place top left duplicate layer mirror horizontal

Resize element 1 to 75% place top center

Copy and paste element 35 place top center

Resize element 24 to 50% place to the right

Resize element 26 to 40% place to the left

Resize element 13 to 35% place to the right duplicate layer mirror horizontal

Resize element 12 to 35% place to the right duplicate layer mirror horizontal

Resize element 7 to 35% place to the left duplicate layer mirror horizontal

Resize element 4 to 35% place to the left duplicate layer mirror horizontal

Resize element 49 to 50% place to the left

Resize element 34 to 40% place to the right

Resize element 61 to 40% place to the right duplicate layer mirror horizontal

Resize your tube to 25%

Resize element 3 to 25% place to the right duplicate layer mirror horizontal

Resize element 33 to 40% place bottom center

Resize element 40 to 20% place to the left of fan duplicate layer mirror horizontal

Resize element 29 to 35% free rotate to the left 15 degrees place to the left

Resize element 30 to 30% place to the left

Resize element 37 to 50% place to the right

Resize element 42 to 35% place bottom center

Resize element 39 to 30% place to the right

Resize element 41 to 15% place to the left duplicate layer move over

Resize element 56 to 25% place to the top right

Resize element 60 to 25% place to the top left

Resize element 63 to 50% duplicate several times and place around tag as desired

Add any other elements you like

Add copyright and info

Layers merge visible

Resize image to 650x650

Save as .png

FTU Spring Fairy

 

I used PSP 2023 but any version of Paint Shop Pro should work. You need a basic knowledge of Paint Shop Pro for this tutorial.

I used the PTU artwork of Laguna called "Little Girl Holding a Chick" which you can purchase at PFD here. You must have a license to use this artwork.

I used a FTU kit from Adrienne's Designs called "Spring Fairy" that you can get here.

I used a FTU mask from Lori's PSP Graphics #1373 you can get here.

Font is called United Kings

Drop shadow used is 2,2,50,10

Refer to tag for placement

Open a blank canvas 800x800

Selections select all

Copy paper 8 paste into selection select none

Apply mask ungroup layers merge down

Resize layer to 110%

Resize element 76 to 50% place to the right

Resize element 75 to 50% place to the left

Resize element 22 to 35% place to the right duplicate layer mirror horizontal

Resize element 62 to 50% place to the left

Resize element 63 to 50% place to the right

Resize element 97 to 15% place to the right

Resize element 49 to 25% place to the right

Resize element 90 to 25% place to the left

Resize element 126 to 10% place to the left

Resize your tube to 23%

Resize element 118 to 20% place to the right

Resize element 121 to 20% place to the left

Resize element 137 to 20% place to the right

Resize element 172 to 18% place to the left

Resize element 155 to 20% place to the left

Resize element 107 to 20% place to the right

Resize element 169 to 20% place bottom center

Resize element 128 to 15% place to the right

Resize element 127 to 15% place to the left

Resize element 174 to 10% place to the right

Resize element 164 to 10% place to the left

Add any other elements you like

Add copyright and info

Layers merge visible

Resize image to 650x650

Save as .png

FTU Sweet Shoppe

 

I used PSP 2023 but any version of Paint Shop Pro should work. You need a basic knowledge of Paint Shop Pro for this tutorial.

I used the PTU artwork of Veleri called "Sweety Puppy" which you can purchase at PFD here. You must have a license to use this artwork.

I used a FTU kit from Adrienne's Designs called "Candy Dream" that you can get here.

I used a FTU mask from Weescotlass Creations #363 you can get here.

Font is called Icing Cookies

Drop shadow used is 2,2,50,10

Refer to tag for placement

Open a blank canvas 800x800

Selections select all

Copy paper 19 paste into selection select none

Apply mask ungroup layers merge down

Copy and paste element 20

Copy and paste element 18 place to the left duplicate layer mirror horizontal

Resize element 37 to 65% place top right

Resize element 39 to 65% place top left

Resize element 45 to 40% place to the right

Resize element 49 to 30% place to the left

Resize your tube to 25%

Resize element 27 to 30% place to the left duplicate layer mirror horizontal

Resize element 97 to 13% place to the right

Resize element 157 to 20% place to the left

Resize element 69 to 30% mirror horizontal place to the right

Resize element 92 to 15% place to the left

Resize element 98 to 20% place to the right

Resize element 116 to 15% place to the right

Resize element 169 to 30% place bottom center

Resize element 152 to 20% place to the right

Resize element 126 to 10% place to the right

Resize element 118 to 20% place to the left

Resize element 138 to 20% place to the right

Resize element 105 to 25% place bottom center

Add any other elements you like

Add copyright and info

Layers merge visible

Resize image to 650x650

Save as .png